Markforged Mark Two Course at MIDAS

MIDAS Course: Markforged 3D Printer

markforged 3d printer MIDAS course

The printer in action. The larger tube feeds plastic filament while the smaller feeds carbon fibre.

Note:  This is a MIDAS certification course.

Sometimes traditional 3D printing just doesn’t cut it – that’s where the Mark Two from Markforged comes in. The Mark Two is an industrial strength 3D printer here at the MIDAS Lab and using continuous fiber inlays together with high-performance nylons, it creates parts that can compete with metal!  The Markforged Mark Two is simply an incredible piece of engineering.

Markforged Mark Two:  High strength parts printed overnight.

Upcoming course April 9, 2018.  Register HERE to reserve your seat!

The MarkForged Mark Two course at MIDAS

A beautiful minimalistically designed and user-friendly desktop machine offering a touchscreen display and a print volume of 120 x 132 x 154mm. Pick your reinforcement and plastics, and remove the time, hassle and design iterations so you can put your parts to use right off the printer, engineered with the right material for any job.

The Mark Two prints with two printheads: one builds nylon parts, and the other is a revolutionary, new composite print head to reinforce those parts with continuous fiber.

By reinforcing your parts with composite fiber while 3D printing them, The Mark Two achieves unparalleled strength, stiffness and durability in its printed parts.  The Mark Two prints materials that no other 3D printer can, like Carbon Fiber, Fiberglass and Kevlar.

3D printing with composite fiber is as much about the software as it is about the unique technology of the printers.  This printer comes with MarkForged’s browser-based 3D printing software, Eiger, which is user friendly, and runs on any computer system, making your printed part flexible or strong in a process that is both easy and intuitive.  The Markforged Eiger software is both powerful and easy to use in your browser, importing your drawing and slicing it for high strength printing.

Markforged Mark Two Eiger software

The touchscreen makes it easy to connect to wifi, start prints and manage your printer.  The Mark Two print bed clicks into place with 10 micron accuracy – allowing you to pause a print, remove the bed, add components, click the bed back in and then continue the print in the exact same position.

Upcoming course April 9, 2018.  Register HERE to reserve your seat!

#madeatMIDAS #makersgonnamake

Markforged Mark Two Course at MIDAS

SaveSave

SaveSave

SaveSave

SaveSave